Mid Pressure - 30 PSI

High Pressure - 70PSI

Rust-Resistant Stainless-Steel Spring with Rubber Burb (Stopper) is built to last
Prevents dripping and creates an instant On/Off mist effect
Saves water by preventing dripping
Reduces maintenance of your misting systems at a very low cost
Flexible; works with low, medium, or high-pressure Fittings for Misting Systems
Stopper available in 15psi Low-Pressure, 40 Psi Mid Pressure, or 70psi High-Pressure Mist System.

1x 10/24 Thread (for Ruby Nozzles only)

Specifications
0.015 Inch - Low Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
10/24 Thread Size
Recommended Pressure: For low pressure misting systems (40 -100 PSI)
Full cone pattern spray 60-70 degrees

10/24 Thread Plug
To block unwanted mist in specific areas.
Remove your existing misting nozzle and replace it with this Nozzle Plug

12/24 Thread Plug
To block unwanted mist in specific areas.
Remove your existing misting nozzle and replace it with this Nozzle Plug

1x 1/8 Thread (for Ruby Nozzles only)

0.020 Inch - Low Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
10/24 Thread Size
Recommended Pressure: For low pressure misting systems  (40 -100 PSI)
Full cone pattern spray 60-70 degrees

0.015 Inch - Low Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
12/24 Thread Size
Recommended Pressure: For low pressure misting systems (40 -100 PSI)
Full cone pattern spray 60-70 degrees

0.012 Inch - Mid Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
10/24 Thread Size
Recommended Pressure: For mid pressure misting systems (100 -300 PSI)
Full cone pattern spray 60-70 degrees

9/16-24NEF x 1/4 Inch FPT

1/8 Inch M X 1/8 Inch F

9/16-24NEF x 1/8 Inch FPT

0.012 Inch - Mid Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
12/24 Thread Size
Recommended Pressure: For mid pressure misting systems (100 -300 PSI)
Full cone pattern spray 60-70 degrees
0.014 GPM (Gallons Per Minute) at 200 PSI

Emits the highest quality of mist for outdoor cooling or indoor-workspace cooling.
Stainless Steel Body is head and shoulders above other Fittings on the market in strength and good looks.
Stainless-Steel Spring resists corrosion including rust.
Can be used with any of our 10/24-inch Misting Nozzles.
Creates On/Off no-drip effect so there is no residual moister on surfaces below the Misting System.
Suitable for many applications and Mist Nozzles.
Purchase Mist Nozzle separately; Not Included

Anti-drip (no-drip) Feature
Stainless Steel Fixed Pin Orifice
Brass Body - Nickel Plated
Instant On, Instant OFF mist effect
60-70 Degree Cone Pattern Spray
0.018 GPM (Gallons Per Minute)

Anti-drip (no-drip) Feature
Stainless Steel Fixed Pin Orifice
Brass Body - Nickel Plated
Instant On, Instant OFF mist effect
60-70 Degree Cone Pattern Spray
0.014 GPM (Gallons Per Minute)

0.024 Inch Orifice - Lowest Flow
Standard 10/24-Inch Threading
Nickel Plated
Applications include cool misting for gazebos, porches, patios, chicken coups, hog pens, barns, or for special effects, spray tanning, brewing, corral cooling, and more
Flow Rate - 0.020" GPM (Gallons Per Minute)