Misting Pump Multi Zone - 3 Multiple Misting Zones
The most common use of this pump is for creating independent residential misting zones including patios, pool areas, gazebos, and commercial installations like outdoor restaurants
Features:
1500 PSI output
3 multiple misting zone
Quiet misting pump operation
Adjustable flow rate
Filtration included
Built-in solenoid
Pressure bypass included
Thermal safety switch included
Pressure gauge
MISTING PUMP WEIGHT & DIMENSIONS
Mist Pump Specifications:
Maximum Outlet Pressure: 1500PSI
Maximum Pump Speed (0.50/ 1 / 2 gpm.): 1750/ 1750/ 1750RPM
Maximum Inlet Pressure: 125PSI
Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if the Pressure switch is bypassed
Maximum Flow: 1/2GPM, 1 GPM, or 2GPM (Refer to manufacturing label on pump)
Voltage: 110V/ 220V AC (Refer manufacturing label on the pump)
Oil Type: Synthetic Motor Oil
Oil Capacity: 11.8oz
Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
1500psi oil-based pumps - 2GPM
Maximum number of nozzles : 160
-
Flow rate (gpm) : 2
-
Filtration :
5 Micron
-
Voltage :
110V AC
- Full load Amps : 16.5
- RPM : 1745
- HP : 2
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
-
Weight (lbs.) :
76
1500psi oil-based pumps - 1GPM
Maximum number of nozzles : 80
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 9.2
- RPM : 1745
- HP : 1
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 61
1500psi oil-based pumps - 0.5 GPM
Maximum number of nozzles : 45
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 5.8
- RPM :
1750
- HP : 0.5
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 52
200 PSI Pumps
- Maximum Inlet Pressure: 100 PSI
- Minimum Inlet Pressure: Self-priming (Capable of lifting water from 6 feet below)
- Maximum Outlet Pressure: 200 PSI (depends on line length and numbers of nozzles)
- Maximum Flow: 0.5 GPM
- Full load amps. (110V ̴̴ 220V AC/ 12V DC): Refer manufacturing label on the pump
- Voltage: 110V-220V AC/ 12V DC
- Noise Level: approx. 35db
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
250 PSI Pumps
- Maximum Inlet Pressure: 100 PSI
- Minimum Inlet Pressure: Self-priming
- Maximum Outlet Pressure: 250 PSI (depends on line length and numbers of nozzles)
- Maximum Flow: 0.9 GPM
- Full load Amps. 110V AC: 0.7 Amps12V DC: 4.0 Amps
- Voltage: 110V-220V AC/ 12V DC
- Noise Level: 40db
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
1000 PSI Pumps
- Maximum Pump Speed (0.15/ 0.30 GPM): 1600/ 1700 RPM
- Maximum Inlet Pressure: 100 PSI
- Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded
- Maximum Outlet Pressure: 1000 PSI
- Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump)
- Full load Amps: (0.15/ 0.30 GPM): 1.38/ 2.00 Amps
- Voltage: 110V/ 220V AC/ 12V DC (Refer manufacturing label on the pump)
- Noise Level: 75 DB
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
1500 PSI Pump
- Maximum Outlet Pressure: 1500 PSI
- Maximum Pump Speed (0.50/ 1 / 2 GPM): 1750/ 1750/ 1750 RPM
- Maximum Inlet Pressure: 125 PSI
- Minimum Inlet Pressure: 40 PSI (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed
- Maximum Flow: 0.50, 1 & 2 GPM (Refer to manufacturing label on pump)
- Voltage: 110V/ 220V AC (Refer manufacturing label on the pump)
- Oil Type: AW-100
- Oil Capacity: 11.8oz
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only. (Please refer page 19 for full specs of the pump)
Specifications
| Multi Zone Misting Pump - Capacity | 0.5 GPM or 1 GPM or 2 GPM |
| Tags | |
|---|---|
| Tags | |